Hookah or smoking shisha charcoal coconut must be solid, dense, simple to ignite, and stay longer with consistent heat. Coconut charcoal is becoming more common among the members of the hookah community since it meets all of the aforementioned requirements. According to a recent poll, 77.59% of hookah users choose coconut charcoal over other types of charcoal (naturally wood charcoal is 16.22% and instantly light charcoal is 6.19%). However, with numerous brands on the marketplace, many consumers are perplexed as to which one is appropriate and will add a wonderful experience to hookah smoking.
Hardness
The shisha charcoal coconut should be sufficiently solid so that it does not break while de-ashing or held with a tong. The trampling test may be used to determine the hardness of the charcoal:
- Place the charcoal on a firm surface and beneath your heel
- Slowly push it with your heel while raising the opposite foot up
- If the charcoal crumbles during this test, it signifies the charcoal isn’t hard enough and isn’t suitable for hookah or shisha smoking.
Density
Coconut charcoal has a greater density than heavier charcoal. Coconut charcoal has a specific gravity greater than 1.3, indicating that it’s much heavier than water. To determine whether the charcoal itself is produced of coconut shell, use the dunk test:
- Take a glass of water and place the charcoal in it
- As a result of its high specific gravity, authentic coconut charcoal needs to sink in water. If it floats in water, you can deduce that it is not coconut charcoal
- The charcoal must remain intact in the water for a period of time. The amount of binder (glue) used determines how long it can dissolve in water. The more binder there is, the longer it will stay intact on the water.
Ignition Time
Depending on the quantity of the charcoal, the time required for first ignition over gas-powered stoves or electric coil ought to range between 7 and 10 minutes. When nearly all surfaces have been covered by just a single layer of ash, you’ll know the charcoal is prepared to use.
Longevity
Depending on the amount of the charcoal, one hookah session ought to last over an hour. For instance, a flat form of 25x25x15mm (1″x1″x0,6″) should survive for more than an hour. While the cube shape size ranged of 25x25x25mm (1″x1″x1″) hookah session needs to last over 90 minutes.
Burned Characteristics
An excellent charcoal has to ignite with consistent and consistent heat and have the following characteristics:
- Flame and temperature stability, around 40 – 45 minutes
- Hardness: while burning, the charcoal is not readily broken
- Surface temperature: roughly 320°C (608°F)
- Average temperature: 350°C (662°F)
- Less stink. Because of the binder concentration, every charcoal must generate some odor during the early ignition period.
- Less smoke. At some level, all charcoal contains volatile substances. When you ignite this volatile, it will produce smoke.
- There will be no sparkling. The sparking effect is caused by the burning of tar residual that has been adhered to the charcoal. Tar residual must be driven out during the process of carbonization in charcoal production, resulting in no tar residue concentration in charcoal.
- Red flame
- No aftertaste.
If you interest to know more information about coconut charcoal, you can visit our website. You can also click here to connect directly with us.